|
| One of two copper sinks for a high
end spa out of 3/32 (.093) 110 copper. They will be butt
TIG welded together so each sink will look as one piece. The
four pieces that make up one sink, each piece is approximately
30 pounds. Sink pictured is approx 8 ft long, the other
sink will be approx 11 ft long. Sinks will be free
standing, hung from wall. |
| "Initial copper blank
measures 69" X 20". Forming the rough shaped
panel on the station buck." |
| "First of 4 pieces of
11 ft copper sink (.093 thick). Due to the strength of
the thick copper all forming is done with bar clamps." |
| "Rough shaping of the 40 lb
copper sink side using a flat steel top die and approx.
12" radius bottom steel die giving a 13/16"
diameter contact." |
|