|
|
|
Shop Tour
Courtesy of John
Buchtenkirch
|
John using the Marchant -- note the air hammer on the wall and all the frames.
|
One thing you can never have enough of --
files. John has some of the very rare ones...
For instance, the 6 inch reveal files are almost impossible to find now. Any curved blade
Vixen
is a treasue to be passed down as an heirloom.
|
The two air hammer oon the left came from Grumman and we
specially built using
Chicago Pneumatic parts. Notice the second swing arm on the blue unit,
|
This is John's press -- I've just got the dig up the
info I have on it
or have John tell us again -- Terry
 |
This air hammer was for sale -- not sure if still
available -- Terry
| © 2007 Metalshapers Association |
All rights to the content presented on this site is retained by its original authors or the Metalshapers Association, and appears here under license. Any use by third parties requires permission from the original author. All rights reserved. |
Some of the equipment and methods shown on this site can cause SERIOUS INJURY or DEATH if used improperly or with negligence. The display of equipment or methods here does not constitute endorsement or insure suitability for any particular use. The user is entirely responsible for their own actions, and assumes any and all associated risks. |
